Table 2 Comparison between MATLAB and ANSYS results with and without fringe field
From: A flexible model for studying fringe field effect on parallel plate actuators
Condition | Pull-in voltage value |
|---|---|
Primary value (from static analysis) | 9.62 volts |
Value according to the Model in [8] | 8.30 volts |
Value after considering the electrostatic stiffness and without considering fringe field using proposed model | 8.30 volts |
Value after considering the fringe field using proposed | 8.18 volts |
ANSYS value (without considering fringe effect) | 8.30 volts |
ANSYS value (considering fringe effect) | 8.18 volts |